.svg){kind=logo}
artesyn™
Intelligent Transfer Switch
Active
Up To 24000 W
Advanced Energy's Artesyn Intelligent Transfer Switch (iTS™) is designed for any application needing power switched to different loads during a 24 hour period (i.e. Horticulture, Burn-in, Test and Measurement, etc.). Advanced Energy’s Intelligent Transfer Switch has a built-in PSU to supply power to the relays and MCU module. It is designed to operate with 2 phases of a 3-PH input mains up to 480 VAC nominal, or standard Phase and Neutral of single-phase mains.
Features
- 100% digital control
- 5 years manufacturer's warranty
- Designed for use with iHP and LCM4000 product families
- Digital communication via RS485 (ModbusRTU)
- Modular 8 channel A:B switch
- MTBF 400K hours per Telecordia SR332 Method 1 Case 4, Part Stress
- Standard 19" rack
- Up to 16 racks are addressable from one control node
- Input Voltage - Control 186-480 Vac Nominal; 1 or 2 phase
- Input Voltage - Relay Module 250V nominal contact rating per module
- Input Current - Relay Module 25A max contact rating per module
- Input Frequency - Control 50/60 Hz Nominal
- # of Relay Modules Up to 8
- Relay Coil from Control 12Vdc @ 1A for up to 8 relay modules (96W max)
- FAULT_1 (OUTPUT) Low asserted to trigger fault if coil voltage >5V
- FAULT_2 (OUTPUT) Low asserted to trigger if outputs A and B active
- EMC/IMMUNITY EN61000-4-X (see datasheet)
- Primary-to-EARTH 2500Vdc
- Primary-to-Secondary 2500Vdc
- Secondary-to-Earth 2500Vdc
- 19 changeable from front to back
Benefits
- Cloud based User configurable GUI
- Configurable baud rate
- Field upgradeable firmware
- Intelligent zero current switching when used with Artesyn devices
- Natural convection cooled (No Fan)
- Reversable mounting tabs
- PRESENT (OUTPUT) Low asserted if relay module present
- Drive_A (INPUT) High asserted to drive relay to A position
- Drive_B (INPUT) High asserted to drive relay to B position
- SGND (OUTPUT) Digital ground reference for MCU
Specifications
| Output Power (W): | 24000 |
|---|---|
| Length (Inches): | 12.6 |
| Width (Inches): | 17.6 |
| Height (Inches): | 3.15 |
| Mounting Type: | Configurable |
| Minimum Output Current (A): | 0 |
| Maximum Output Current (A): | 200 |
| Minimum Output Power (W): | 0 |
Introducing ConfigPro
Advanced Energy’s Revolutionary Online Power Configurator
With over 3 million configurable power supply combinations, this power solution algorithm optimizes cost and guides you to the ideal solution for MP, IMP, IVS, and MICROMP (UMP) configurable power supply families.
Get Started
Technical Documentation
24/5 Support Available
Get Expert Advice From Our Engineers
We are committed to providing excellent customer service and technical support to our customers. With live chat and phone support, you can reach out to a qualified engineer for help at any time.
Get Support Now