ALD Series

35 Watt Sixteenth-Brick Isolated DC-DC Converters

The ALD series of sixteenth-brick isolated DC-DC converters comprises seven single output models offering fully regulated voltages of 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V or 12.0 V. The 1.2 V and 1.5 V models can deliver up to 15 amps. These converters have a wide 2:1 input range of 36 to 75 Vdc and are designed primarily for use with standard 48 V telecommunications equipment supplies. Rated at 35 watts, they employ an open-frame construction, offer up to 91% efficiency and accommodate an ambient operating temperature range of -40 to 85˚C. The converters use fixed frequency switching to minimize the need for EMI filtering.

Standard features include output trim, remote enable, undervoltage lockout and differential remote sense. The converters offer up to 91% full load efficiency and are comprehensively protected against overvoltage, overcurrent and overtemperature conditions. ALD series converters have an installed height of just 0.34 inch (8.6 mm), making them ideal for systems with demanding inter-board spacing requirements.

データシート 技術文書 このページを印刷
  • 合計最大出力:
    35 W
  • 合計最大電流:
    15 A
  • 入力電圧:
    36 V to 75 V
  • 出力電圧:
    1.2 V ~ 12 V
  • 出力:
    Single
  • サイズ(L x W x H):
    1.300" x 0.900" x 0.350"
  • 保証
    2 years
  • 動作温度:
    -40°C to +85°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Input Surge: 100 V / 100 ms
  • Efficiency: 90.5% @ 12 V (typ)
  • Input Voltage: 36 - 75 VDC
  • Overvoltage Protection: 125% Vo typ (autorestart)
  • Remote Sense: Up to 10% of Vo
  • Transient Response: 3%Vo (typ) deviation, 50% to 75% Load Change
  • Over Current Protection: 115% Io typ (autorestart)
  • Over Temperature: 115°C average PCB temperature (autorestart)
  • Switching Frequency: Fixed Frequency
  • Noise/Ripple: 40mVp-p typ
  • Load Regulation: ±0.1%Vo typ
  • Line Regulation: ±0.1%Vo typ
  • Enable Logic: Negative (N suffix) or Positive
  • Isolation Voltage: 1500 Vdc
  • High Efficiency
  • High Density
  • High capacitive load limit on start-up
  • Regulation to zero load
  • Fixed frequency switching
  • Through Hole or Surface Mount Termination
  • Basic Insulation
  • EU Directive 2002/95/EC Compliant for RoHS

貴社の製品選択をお手伝いします

条件による新規検索

Sales Support
☒ Close