LGA80D Series

Digital Dual Output Non-isolated Converter

The LGA80D is a non-isolated DC-DC converter that is designed for cost and space sensitive applications.

This non-isolated unit offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. With a footprint of 1 x 0.5 inches or 25.4 x 12.5 mm.

The module offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. You can generate higher current rated rails by connecting up to 4 units in parallel so that up to 320 amps can be supplied as a single power rail.

The input voltage and output voltage specifications remain the same in any configuration, so the input is defined as 7.5 V to 14 V and the output voltage can always be adjusted within the range of 0.6 V to 5.2 Vdc at a maximum efficiency of 95.5% by either PMBus or via external resistor configuration.

The LGA80D is a unit that is applied in applications by surface mount technology via its block-pin terminations and can withstand reflow oven temperatures and is supplied in tape-and-reel packaging for simplest production management.

Visit LGA80D Demo Kit Series page データシート Brochures Press Releases 技術文書 このページを印刷 Technical Videos

Product Training Videos

LGA80D Product Training Module

Product Training Manual Videos
  • 合計最大出力:
    200 W
  • 合計最大電流:
    80 A
  • 入力電圧:
    7.5 V to 14 V
  • 出力電圧:
    0.6 V ~ 5.2 V
  • 出力:
    Dual
  • サイズ(L x W x H):
    1.000" x 0.500" x 0.500"
  • Warranty:
    2 years
  • 動作温度:
    -40 degC to +85 degC

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Input voltage : 7.5Vdc to 14Vdc
  • Power: 200W maximum
  • Output voltage: 0.6V to 5.2V
  • Output: 80A at Single O/P config
  • Output: 40A per channel in Dual O/P config
  • Control: resistor control and configuration
  • Control: Digital control by PMBus
  • Isolation: Non-isolated
  • Mechanial: 1inch by 0.5inch by 0.5inch
  • Mechanical : Surface-mount reflow compatible unit
  • Packaging: Tape and reel packaging
  • Mechanical: Block-pin terminations
  • MTBF: 50M hours (SR-332, iss-3, method 1, case1)
  • Efficiency: 95.5% (at 5V output)
  • Switching frequency: 457Khz per phase nominal
  • Warranty: 2 years
  • Ambient Temperature: -40 to +85 degC
  • 200W Point of Load converter
  • Dual or single output configuration possible
  • High efficiency up to 95.5%
  • Small size 1” x 0.5” x 0.48” (LxWxH)
  • Supports PMBus
  • No minimum load requirement
  • Wide operating temperature range
  • Exceptional power density
  • Excellent transient response
  • Analog or digital control
  • IPC9592B compliant
  • Tape and reel packaging
  • Reflow compatible
  • Possible to stack up to 8 phases (4 units) for 1 rail of 320 A
  • Two year warranty
  • Evaluation kit is available

貴社の製品選択をお手伝いします

条件による新規検索

Sales Support

Data protection – The information you provide on this form will be held on file by Artesyn on a database and will be used for the purposes of promotion of Artesyn products, services and other stories. By submitting this form, you consent to the use of your personal data for these purposes.

We use a tool called Mailchimp to manage our subscriber lists, so when you apply to join, you will receive an email from Mailchimp to confirm that you wish to join the Artesyn mailing list (the email will be from an address such as Artesyn Embedded Power <info@mail1.mcsignup.com>). Please click on the link in the email – this is to help us protect your privacy. You can unsubscribe at any time.

☒ Close