AIT00ZPFC Series

Three Quarter Brick PFC Modules

The AIT00ZPFC series of three-quarter-brick power factor correction modules accept a 100–122 Vac input and present a unity power factor. They accommodate AC supply frequencies of 50 Hz, 60 Hz or 360–800 Hz, and a DC input version is also available. Rated at 150 watts, the modules have a high conversion efficiency of 91% and provide a typical output voltage of 393 Vdc.

Based on an encapsulated design that incorporates a thermal baseplate, the AIT00ZPFC series PFC module accommodates a baseplate operating temperature range of -20 to 100˚C and can start up from temperatures as low as -40˚C. The module has an industry-standard 2.4 x 3.5 inch (61 x 88.9 mm) footprint and an installed height of only 0.54 inch (13.9 mm).

Artesyn Embedded Technologies’ AIT00ZPFC series PFC modules comply with the RTCA-DO-160 avionics standard and the IEC1000-3-2 harmonics emission standard.

Datasheet Technical Documentation Print this page
  • Total Max Power:
    150 W
  • Total Max Current:
    0.3 A
  • Input Voltage:
    100 V to 122 V
  • Output Voltage:
    393 V to 393 V
  • Outputs:
    Single
  • Size (L x W x H):
    3.500" x 2.400" x 0.550"
  • Warranty:
    1 year
  • Operating Temperature:
    -20°C to +100°C
  • 5.0V/3.3V dual outputs
  • Enable (on/off)
  • Output loadsharing
  • Industry standard pin-out
  • Trim feature, both rails
  • 100°C Baseplate temperature
  • Unencapsulated 2.3" x 2.4" x 0.50" pkg.
  • 48VDC Input
  • Thermal protection

貴社の製品選択をお手伝いします

条件による新規検索

アーティセン・エンベデッドテクノロジーズ

Sales Support
☒ Close